Get Started

Quote

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Affordable Concrete Cutting - Phone(781) 233-7117info@affordableconcretecutting.com
Top

FAQ

FAQ
Home
FAQ
Affordable Concrete Cutting - Concrete Cement

Frequently Asked Questions

What areas of Massachusetts do you serve?

Middlesex County, Essex County, Suffolk County, Norfolk County, Bristol County, and Plymouth County. We also service Southern New Hampshire, Rhode Island and Southern Maine.

Do you only cut concrete?

No, we cut, drill and demolish brick, asphalt, granite, and other masonry materials.

What do I need to remove or clean out in my basement for a concrete doorway or window cut?

We need about 5 feet cleared away from the wall inside the basement and 3 feet on each side of the cuts. You must remove any items or shelving that are in this area of the cuts prior to our arrival. We will need to install protective tarps and have access for a vacuum in the area provided.

How much do I need to dig out for a concrete basement window prior to your arrival?

Ideally, You need to dig 1 foot wider than the side cuts, 4 feet back from the wall, and 1 foot deeper than the bottom cut. (In many cases this digging can be achieved by an aggressive "Do it Yourselfer".) Due to time constraints and scheduling it is very important that this task, along with all necessary layout of cut lines be completed prior to our arrival.

How much do I need to dig out for a concrete basement doorway prior to your arrival if any digging is necessary?

You must dig at least 1 foot wider than the side cuts (preferably 20"), 8 feet back from the wall, and down to the footing. The doorway is removed in one large piece. If you want to bury the concrete piece rather than paying to have it "Broken Up", then it needs to be dug at least 15 inches below the footing. (We recommend having this area dug out by a professional excavating contractor rather than by hand) Due to time constraints and scheduling it is very important that this task, along with all necessary layout of cut lines of the concrete to be cut be completed prior to our arrival.

When is the best time to cut a concrete doorway or window in my concrete foundation?

If possible, the best time is during the excavation of your project, if any may occur. Your window or doorway can be "Cut and Dropped" into a hole the excavation contractor can dig for you. This saves you the cost of break up and the nuisance of removing the concrete debris.

Do you pour concrete foundations, slabs or patios?

No. You should contact a professional that specializes in this field of construction.

Do you install windows and/or doors into the concrete openings when you are done cutting?

No. You should contact a professional that specializes in this field of construction.

Do you remove the concrete from site?

In most residential cases it is not cost effective for us to remove the concrete from site, although we do offer this service, it is very expensive. We do, however, jackhammer or "Break Up" the concrete into manageable football size pieces for easy handling for an additional charge.

Will the concrete edges of my doorway or windows be smooth?

Yes! The edges of your concrete opening will be smooth as glass. Your openings will be so smooth, level, plumb and square, a door or window can be framed out and installed within it immediately after our completion.

Do you cut from the inside or the outside of the structure?

When possible, we cut from the outside of the structure. Cutting the concrete from the exterior to the interior will cause most of the water used to eliminate dust cool and to cool our blades be deposited outside. We also use special water control procedures on the interior to make sure any water that does enter the home is contained.

How long does the concrete cutting process take?

Generally, a doorway "Cut, Drop and Break" takes between 3 to 4 hours from the time we arrive until the time we leave. The time can vary significantly for other types of concrete cutting and we can determine the amount of time required as soon as you explain your concrete cutting project to us.

Will there be any dust or mess?

No there won't be any dust or mess! We use diamond segmented saw blades and water to cut your concrete. As the water hits the blade, it traps any dust particles and produces a liquid substance called slurry, which is vacuumed up. There are no giant toxic dust clouds.

Why should I use Affordable Concrete Cutting Massachusetts?

Besides the fact that we provide unmatched quality, pricing below industry standards and offer courteous "Old Fashioned" service, Affordable Concrete Cutting Massachusetts uses the most advanced diamond concrete cutting technology. We provide significant advantages over more time consuming conventional methods of concrete cutting. These advantages vary depending on the job, but include fast, precise "smooth as glass" concrete cutting technology, a dust free environment and reduced stress to maintain the structural integrity of the structure.

Frequently Asked Questions

What areas of Massachusetts do you serve?

Middlesex County, Essex County, Suffolk County, Norfolk County, Bristol County, and Plymouth County. We also service Southern New Hampshire, Rhode Island and Southern Maine.

Do you only cut concrete?

No, we cut, drill and demolish brick, asphalt, granite, and other masonry materials.

What do I need to remove or clean out in my basement for a concrete doorway or window cut?

We need about 5 feet cleared away from the wall inside the basement and 3 feet on each side of the cuts. You must remove any items or shelving that are in this area of the cuts prior to our arrival. We will need to install protective tarps and have access for a vacuum in the area provided.

How much do I need to dig out for a concrete basement window prior to your arrival?

Ideally, You need to dig 1 foot wider than the side cuts, 4 feet back from the wall, and 1 foot deeper than the bottom cut. (In many cases this digging can be achieved by an aggressive "Do it Yourselfer".) Due to time constraints and scheduling it is very important that this task, along with all necessary layout of cut lines be completed prior to our arrival.

How much do I need to dig out for a concrete basement doorway prior to your arrival if any digging is necessary?

You must dig at least 1 foot wider than the side cuts (preferably 20"), 8 feet back from the wall, and down to the footing. The doorway is removed in one large piece. If you want to bury the concrete piece rather than paying to have it "Broken Up", then it needs to be dug at least 15 inches below the footing. (We recommend having this area dug out by a professional excavating contractor rather than by hand) Due to time constraints and scheduling it is very important that this task, along with all necessary layout of cut lines of the concrete to be cut be completed prior to our arrival.

When is the best time to cut a concrete doorway or window in my concrete foundation?

If possible, the best time is during the excavation of your project, if any may occur. Your window or doorway can be "Cut and Dropped" into a hole the excavation contractor can dig for you. This saves you the cost of break up and the nuisance of removing the concrete debris.

Do you pour concrete foundations, slabs or patios?

No. You should contact a professional that specializes in this field of construction.

Do you install windows and/or doors into the concrete openings when you are done cutting?

No. You should contact a professional that specializes in this field of construction.

Do you remove the concrete from site?

In most residential cases it is not cost effective for us to remove the concrete from site, although we do offer this service, it is very expensive. We do, however, jackhammer or "Break Up" the concrete into manageable football size pieces for easy handling for an additional charge.

Will the concrete edges of my doorway or windows be smooth?

Yes! The edges of your concrete opening will be smooth as glass. Your openings will be so smooth, level, plumb and square, a door or window can be framed out and installed within it immediately after our completion.

Do you cut from the inside or the outside of the structure?

When possible, we cut from the outside of the structure. Cutting the concrete from the exterior to the interior will cause most of the water used to eliminate dust cool and to cool our blades be deposited outside. We also use special water control procedures on the interior to make sure any water that does enter the home is contained.

How long does the concrete cutting process take?

Generally, a doorway "Cut, Drop and Break" takes between 3 to 4 hours from the time we arrive until the time we leave. The time can vary significantly for other types of concrete cutting and we can determine the amount of time required as soon as you explain your concrete cutting project to us.

Will there be any dust or mess?

No there won't be any dust or mess! We use diamond segmented saw blades and water to cut your concrete. As the water hits the blade, it traps any dust particles and produces a liquid substance called slurry, which is vacuumed up. There are no giant toxic dust clouds.

Why should I use Affordable Concrete Cutting Massachusetts?

Besides the fact that we provide unmatched quality, pricing below industry standards and offer courteous "Old Fashioned" service, Affordable Concrete Cutting Massachusetts uses the most advanced diamond concrete cutting technology. We provide significant advantages over more time consuming conventional methods of concrete cutting. These advantages vary depending on the job, but include fast, precise "smooth as glass" concrete cutting technology, a dust free environment and reduced stress to maintain the structural integrity of the structure.
Services
We service over 1000 satisfied customers every year, both homeowners and contractors. We are by far "New England's Fastest Growing Concrete Cutting Service"
1

Concrete Wall Sawing

Cutting and/or enlarging door, window and bulkhead openings in concrete foundations.

Learn More
2

Concrete Core Drilling

Cutting 1" to 24" diameter perfectly round core holes for electrical, plumbing or vents in concrete floors and foundations.

Learn More
3

Concrete Slab Sawing

Cutting and dicing concrete floors, concrete walkways, concrete patios or concrete pool decks for easy removal and/or neat patching.

Learn More
4

Interior Trenching

Cutting trenches in concrete floors for plumbing, electrical, sump pumps, French drains or other utilities.

Learn More
5

Jack Hammer Service

Breaking concrete into manageable pieces for easy removal.

Learn More
6

Cutting and Removal

We cut and remove concrete, stone or masonry walls, floors, walkways, patios and stairs.

Learn More
Customer Reviews
We are absolutely committed to customer service!
We guarantee it!
Matthew Spearin

Great transaction from being to end!  Scott in the office answered all my questions and David the technician got the job done thoroughly and professionally.  Definitely affordable and would highly recommend!!

Stanley Etienne

I had a great experience working with Affordable Concrete Cutting. I needed help last minute and Scott came through for me. I highly recommend! Thank you!

Kevin Jones

Couldn’t have had a better experience. They were friendly, organized, efficient, clean, and well prepared for everything I asked and the job itself. If I decide to cut more holes in my basement I will definitely be using them.

Joan Vegara

The whole experience was smooth and very professional. Scott handle the scheduling and was quick to to set an appointment. Dave the technician was punctual and very professional and cleaned up everything afterwards. I would highly recommend them.

Alan Paquette

Been using them for years totally professional. They have the best equipment and price always in and out. Couldn’t get better service.

Kathy Sullivan Maihack

I highly recommend ! David was right on time and did a great job! Very friendly and cleaned up completely after! Scott fit me into the schedule on short notice which helped out so much ! Definitely 5 our of 5 stars !!

Book your job today!

What are you waiting for? You have already found the only company in our industry that offers a guarantee, the most professional concrete cutting service available anywhere and the most competitive prices in the concrete cutting industry.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Affordable Concrete Cutting - Concrete Sawing
Affordable Concrete Cutting - Concrete Cement

20,000

+
projects completed

5,000

+
happy clients

20

+
year experience

5

+
team members
Are you ready?

Let's Work Together and Cut Concrete
Free Estimates

Get Started
Affordable Concrete Cutting - Concrete Cement
HomeAboutServicesConcreteArticlesFAQContactSearch
Call Affordable Concrete Cutting Today!
Affordable Concrete Cutting - Phone(781) 233-7117affordableconcretecutting@gmail.comAffordable Concrete Cutting - Map Pin
147 Lynn Fells Parkway
Saugus, MA 01906
Designed by Scaler Marketing